Hi Friends,
I tried to read about remaking of parts for the Bagheera using Babelfish to translate but it is very difficult to understand.
Could someone please summarize what you are doing and if there is any possibility to buy parts.
Best regards,

Stig

yes, stig, i will make a sumary this afternoon

_________________
" t'as bien de beaux outils...Ils doivent pas servir souvent."..

Salut
Suite à la demande de Stig, je fais un point sur les refabrications, les prix indiqués sont à titre purement indicatifs. je ne sais pas les prix pratiqués par hb...
certains projets n'intéressent pas HB, ils seront menés ou pas par le bagherathon ou selon les demandes.
Les objets cités sont vendus exclusivement par HB pièces auto...Tout membre du bagheerathon ou tout souscripteur peut en avoir aux tarifs de base s'il en reste
Hello
Following request for Stig, I give a progress report on the remakings, the prices indicated are purely indicative. I don't know the prices charged by hb... some projects do not interrest HB , they will be carried out or not by the bagherathon or according to requests. The quoted objects are sold exclusively by HB pièces Auto... Any member of the bagheerathon or any subscriber can have it with the basic price if it it remains about it

Chez hb / Available
1) bas de caisse droit et gauche ...100-160? right and left

2) bac de batterie 40 - 60?

3) planchers droit et gauche 100- 160 right and left

Pas encore chez hb, peut être fabriqué à tout moment sur demande
Not yet at hb, can be manufactured constantly on request
4) pare boue gauche 30 - 50?

5) tole de fermeture plancher ??? 10-15? ???

6) pied de porte .en construction...200 - 300?
Available in september 2007
[URL=http://imageshack.us]

7) Projet validé par hb ...demi malle avec moulure de renfort et renfort en W dessous 135 -200?
In future ...Project validated by hb... half trunk with moulding of reinforcement and reinforcement out of W below 135 -200

In project
bouche de série 1 ...hb non intéressé...45- 70? selon le nombre de demandes

For series 1... hb noninterested... 45- stops 70? according to the number of requests

9) pieds de porte arrières, hb ok....100- 150? droit et gauche...à l'étude par romop36
feet of door postpone, hb ok... 100- 150? right and left... in design by romop36

10) plancher central ...hb non interessé...il faudrait au moins 5 commandes pour avoir un prix de 170?
central floor... hb not interested... we need at least 5 orders to have a price of 170?

11) plancher arrière conducteur ... sur demande, disponible en juillet ..50?
floor postpone conducting... on request, available in July..50
12)malle complète , hb non intéressé, 1100? pour un exemplaire 300? si au moins 10 commandes
complete trunk, hb noninterested, 1500? for a specimen 300? so at least 10 orders
Baghbe a aussi lancé des refabrications...il en parlera mieux que moi

Baghbe as launched remakings... it will speak about it better as me

_________________
" t'as bien de beaux outils...Ils doivent pas servir souvent."..

C'est mon pied de porte qui est tout rouillé comme ca .....
Sinon, que dire, GRANDIOSE" , bravo Joe, et a des prix correct , ...

Sinon, il y a moyen de mettre un petit catalogue des pièces du bagheerathon en ligne ? ce serais vachement pratique.

Non , rassure toi , le tient je l'ai donné à romop pour qu'il le mette à plat sous une presse...pour qu'on puisse prendre les mesures

Oui, tout à fait...je n'ai pas envie de faire comme l'amicale 530...on ne sait pas du tout ce qu'ils font ni ce qu'ils proposent comme refabrications....probablement rien

donc tu as déjà une ébauche de catalogue...sauf pour les prix, ils ne sont pas réellement fixés ( ils ne seront pas supérieurs à ce que j'avais dit il y a trois mois )...ça dépend des futurs projets...de leur financement et de l'engagement ou non d'HB sur ces projets....je rêve d'une malle complète neuve pour ma orange

_________________
" t'as bien de beaux outils...Ils doivent pas servir souvent."..

ok, on continu d'en parler sur le bagheerathon, car ici on s'écarte du sujet, et notre ami suèdois ne va rien y comprendre.

Hi Stig,
Since I'm asked to speak about it, here is what I can provide.
New little things not available:
- Some weathershield profiles
1) the rubber gasket for an opening roof
2) The rubber gasket on the door between the poliester panel and the glass
3) The rubber profile above the door glass surounding
( of course I don't remake them )
- Some moulded plastic parts
1) the conical alloy wheel center part ( unchromed. I'm still looking for a satisfactory solution to chrom on plastic) This for the Courreg or any serie 1 before the 1976 model ( only alloy wheel)
2) The same but flat for the later models
3) I could think about others upon demand
4) I'm currently developping a big mold to reproduce in polyester the steel profile for the little front bonnet. The mold is about done. It will have the second shape ( serie 2) but without the little opening to hold the shaft for the scissor cric. Since this is labour intensive, I'm only planning to produce them upon demand
- Steel things
1) stupid little things : the steel plate in different thickness to set the suspension. These are laser cut
2) Not industrialised like Joe, I can produce a repair profile to go under the driver seat, only the side where it's always rusting away. No need to replace the complete part
3) I can also produce a corner to repair the rear bottom of the inner sill. Just before the place where the rear suspension is attached
- Tools. That's an idea only for the moment

To be able to tune the suspension, a special tool is to be made to replace the front damper with 2 fitting points ( high and low set). Since I had to do them for my usage, I can reproduce it

Hi,
Thanks for your answers
The pieces in your photos look really good Joe
I am doing an inventory list to see what will be needed for the courrége resto.
From what I can see of the original rust (they were made of prerusted steel ) most will have to be replaced.
By the way. How do I do to become a member of the Bagheerathon ?
Regards,

Stig

I forgot.
I also reproduced the lateral sticker specific to the Bagheera S Year model 1976 ( only )
To support the Bagheerathon, a cotisation is to be sent to Aiemac.
You will receive access to
- an additional section of the forum
- a library web site that contains most of the articles ever published on Bagheeras + manuals ...
- a status of the stock of parts we purchased + the possibility to get some at a discount price.
- Massive price reduction at HB pieces

That's all for the moment

Thanks for your answers
Yes I would like to be a member. How many Euros is the standard fee?
Aiemac, can I send it to your adress (the one you put on the letter with the samples you sent me ).
Best regards,

Stig

I would say that you still need only 4 other orders
I'm interested

How is it on the side ? Does it go over the chassis legs ?

I would say that we still need only 3 other orders
cause Eric was interrested....and maybe...for my black bagh

it goes over the chassis legs , the width can be 1m without problem

_________________
" t'as bien de beaux outils...Ils doivent pas servir souvent."..